Pool Repair

Why Do I Need Waterline Tiles?

Why Do I Need Waterline Tiles? 150 150 Pools Finishing Inc

POOLS FINISHING INC.

Why Do I Need Waterline Tile?

Waterline tiles can create a great look or style but it isn’t just for looks. Pool finishes need to stay wet for maximum durability and uniform color. Since tile can be wet or dry and resists staining, it is installed beneath the coping to avoid stains from fluctuations in the water level.  Without this tile protection, you would constantly have to scrub and repair the top edge of your pool surface at the waterline. See the bare surface reaction when the water level is left sitting below the waterline tile for a short period of time(picture above).   Read More

Pool Resurfacing Common Questions Answered

Pool Resurfacing Common Questions Answered 150 150 Pools Finishing Inc

POOLS FINISHING INC.

Pool Resurfacing Questions?

Get Answers Here!

  • Water chemistry for your pool varies depending on whether or not the plaster is within the first 28 days of its life. After the 28 Day Start-Up Procedure has been performed, daily water chemistry should be maintained within the ‘ideal range.’

    This range is as follows:

    • Free Chlorine = 1 to 3 ppm
    • Total Chlorine = 1 to 3 ppm
    • Sequestering Agent as per Manufacturer’s directions
    • pH = 7.2 to 7.6
    • Carbonate Alkalinity = 80 to 120 ppm
    • Calcium Hardness = 200 to 400 ppm
    • Cyanuric Acid = 30 to 50 ppm
    • TDS = 300 to 1800 ppm (non-salt pools)
    • Salt Level = according to the manufacturer recommendations (salt chlorination ONLY)

    You can use the LSI Calculator (Langelier Saturation Index) to determine if your water chemistry is balanced within the spectrum. The measurement from Scaling to Corrosive should show your pool’s water to be 0.0 to +0.3.  Anything out of this range requires the proper chemical adjustments to bring your water within the acceptable range.

    These measurements are a general consensus from the trade industry.  It is recommended to verify the correct chemical balance for your pools’ water with the Pool Plasterer and Product Manufacturer as to the specific ranges they require.

  • Caution: There should be Nobody, including Pets, allowed in the pool during the fill period. Damage can happen to the new surface that may not be visible immediately.  Do not try to speed the fill of your pool with any external sources of water in order to prevent streak marks.

    Do not swim in the pool until the water is properly balanced, sanitized, and no more loose plaster dust from brushing is present.  Entering the pool once it is filled with water will not harm the finish; however, It is not recommended to swim in it until it is completely ready, due to the chemicals used to sanitize and balance the pools’ water pH.

  • Water is part of the curing process of a new pool plaster finish. Irreparable damage can occur as soon as 24 hours depending on the local environment on a given day. The pool finish is “immersion cured” which means it is designed to be cured underwater. This makes sure the cement is properly hydrated to prevent delamination, bond failure, crazing, & structural cracking. These are all common events that occur when pools are left dry too long.

  • Pool Plaster Finishes come in many more colors than traditional white. See available colors for Diamond Brite and Florida GEM Finishes on our website.  Darker colors can be affected by the Sun U/V rays and fade a bit over time, but they offer a dramatic effect to the look.

5 Reasons to Resurface Your Pool

5 Reasons to Resurface Your Pool 150 150 Pools Finishing Inc

POOLS FINISHING INC.

5 Reasons to Resurface Your Pool

1) The Off-Season

The time of year when you're using your pool less.

Resurface your Pool before it starts to give you problems. This is an important quick guide to help you identify the signs & know when you should resurface your pool.

If you live in Florida year-round, you probably don’t use your pool every day. Unless it is heated, many Floridians find it too cold to swim in the “Wintertime”.  Maybe you’re a snowbird and you will be away for a while, so your pool will just be sitting unused anyway.

Whenever it’s your pools’ off-season or your pool activities are minimal; this is the best time to resurface your pool.  You may not be thinking about it, but you have to still maintain the integrity of your pool so you can enjoy your pool to its fullest when you’re ready. This may also be the perfect opportunity to have your pool remodeled with some upgrades like a sun shelf, hot tub spa, water features like fountains and waterfalls.  If you are enjoying your pool now, but notice some issues that need to be addressed, as long as they are not urgent, it may be best to plan ahead for scheduled pool repairs and/or resurfacing.

2) Pool Staining and Discoloring

Those unsightly patchy green and brown spots, Yuk!

Pools can start to get discolored after years of wear and tear. These stains can come from the minerals, chemicals, or other materials in the water such as leaves and natural debris.

The stains may be algae, which will be a greenish shade or even reddish sometimes, depending on the type of algae. Try cleaning the surface with a brush, If your cleaning efforts are unsuccessful, it may be time to resurface the pool.

3) Uneven patches or Material Is Coming Off

Surface craters in your pool can hurt your feet

If your pool surface feels like sandpaper on your feet or there are areas that have come off, leaving “potholes” in your pool surface, it’s time to resurface your pool.

There are a lot of different factors that can cause the pool’s surface materials to break down and come off, such as:

  • Pool Use: Years of heavy use and neglect can wear down the surface of your pool.
  • Age of Surface: Time can breakdown the aggregate compound composition and will start to show the underlying pool cement or gunite surface.  A Diamond Brite or Florida GEM finished surface typically lasts 5-10 years depending on proper water chemistry and maintenance.
  • pH Levels Unbalanced: If the pH levels for the water are not balanced properly it can expedite the deterioration of the pool surface.

Pool resurfacing is important to have done as soon as you notice problems. Once the surface layer starts to flake and chip off, it will continue to deteriorate and may cause leaks, if it has not already started.

4) Your Pool is Leaking

Notice puddles where they shouldn't be?

Don’t wait to have your pool resurfacing or pool repair work done. The longer you wait to repair a leak in your pool, the more it is going to cost you to fix it.
Watch for the telltale signs of a leak and see if it is time to repair or resurface your pool:

  • Cracking: Visible cracks or gaps in the concrete in or around your pool are a sure sign of a leaking pool. If your pool isn’t leaking, these issues should be addressed anyway for your safety.
  • Low Water Level: If your pool water seems to evaporate faster and the pool water level is lower than normal, even with routine maintenance.
  • Loose Tile: When the waterline tiles are Loose or falling off, it can be a sign of a pool leak. These should be repaired even if your pool is not leaking to protect the pool surface from deterioration at the waterline.
  • Wet Surroundings: Often if you see unusual wet areas near the pool area that don’t normally happen with rain or lawn sprinklers, it could be caused by a leak in the pool.

If you are noticing any of these signs or think you may have a pool leak, contact us and we will perform an inspection and give you a Free Estimate for pool repairs or pool resurfacing.

5) You’re Ready for an Update

About time for your pool to have a facelift?

Pool Resurfacing can transform and enhance the way your pool looks, with color and style beyond just repairing and routine maintenance of your pool surface. Resurfacing your pool will give you the opportunity to update the space, change the materials like waterline tiles, designs, and aggregates. There are many color choices for Diamond Brite and Florida GEM pool plaster along with textures to create a pool entertainment space that is unique to your color palette and style. There are many trendy options that can turn your pool in a luxurious oasis, while also fixing any surface issues. While you are doing a pool resurfacing or repair, you can take advantage of the situation by remodeling your pool with some luxury upgrades like a sun shelf, hot tub spa, fountain, or waterfall to enhance your pool features. These additions not only enhance your enjoyment of your backyard oasis but also increase the resale value of your home.